The daily maintenance of the water drip type hammer mill is a key link to ensure its high efficiency and stable operation. The following are some key daily maintenance steps and suggestions:

1. Regular inspection and tightening

Regularly inspect all components and connection parts of the grinding mill to ensure there is no loosening or wear. Pay special attention to the main components, such as bearings, reducers, drive belts, etc., as well as various valves and pipelines. When looseness is found, it should be tightened in time to prevent the component from falling off or being damaged due to vibration.

Ii. Lubrication and Maintenance

According to the usage of the equipment and the manufacturer's suggestions, select the appropriate lubricating grease for lubrication. Before starting the grinding mill and after a long period of shutdown, check the condition of the lubricating grease and replace it if necessary. Ensure that the equipment operates under good lubrication to reduce wear and malfunctions.

Iii. Cleaning Work

Clean the water drip type hammer mill regularly, especially the parts prone to dust accumulation such as the screen and the filter. Use a high-pressure water gun or air gun for cleaning to ensure the cleanliness of both the interior and exterior of the equipment. Cleaning work helps to improve the heat dissipation performance and grinding efficiency of the equipment.

Iv. Inspection of the cooling system

When the grinding mill is in operation, it generates a large amount of heat, which requires a cooling system to dissipate it. Regularly check the working condition of the cooling system to ensure good cooling effect. When faults in the cooling system are detected, relevant components should be repaired or replaced in a timely manner.

V. Replacement of Vulnerable Parts

The vulnerable parts of the grinding mill, such as grinding rollers and grinding discs, will wear out after long-term use. Regularly inspect the wear of these vulnerable parts and replace them according to the degree of wear to ensure the normal operation of the equipment and the quality of grinding.

Vi. Correct operation and Record-keeping

Operators should carefully read the operation manual of the equipment to understand its working principle and operation norms. During the operation process, pay attention to the running status of the equipment and avoid overloading operation. Meanwhile, establish maintenance and upkeep records for the grinding mill, documenting the time, content and results of each maintenance and upkeep, so as to track the maintenance status of the equipment.

To sum up, the daily maintenance of the water drip type hammer mill involves multiple aspects and requires the operators to carry it out carefully and patiently.

water drip type hammer mill https://www.hammer-mill.com/jfs-2000-serial-hammer-mill.html